REAL CLAY POKER
CHIP 39mm MOLD DESIGNS |
Please note that both Crown molds, the FDL & 44mm A-Crest molds
produce chips with smooth inlays.
All other molds produce inlays textured
to some degree. |
|
A-Crest (also known
as A-Mold or American Mold) |
The letter
A in four places separated by dashes
around the rim. |
|
Recommended for 7/8", 1" & 1-1/16" inlays and
hot-stamping. |
|
B- Diamond |
The letter
B in Four places separated by diamonds
around the rim. |
|
Recommended for 7/8" & 1-1/16" inlays
and hot-stamping. |
|
Cards &
Dice (also known as DIECAR or DIECARD) |
Four pairs
of dice and 4 sets of cards alternated
around the rim. |
|
Recommended for 7/8" inlays and
hot-stamping. |
|
Circle
Square (also known
as Square in Circle or SQINCIRC) |
A series
of squares within a circle
around the rim. |
|
Recommended for 7/8" inlays and
hot-stamping. |
|
Diamond
Square (also known as DIASQR) |
A series
of alternating diamonds and rectangles
around the rim. |
|
Recommended for 7/8" inlays. |
|
Elephant &
Crown |
A series
of alternating elephants and crowns
around the rim. |
|
Recommended for 7/8" & 1" inlays. |
|
Ewing |
A series
of dice interspersed with pairs of card
pips around the rim. |
|
Recommended for 7/8" & 1" inlays.
AVAILABLE TO CASINOS ONLY |
|
Fleur-De-Lys (also known as FDL) |
A series
of 8 fleur-de-lys'
around the rim. |
|
Recommended for 1-1/16" inlays. |
|
H-Mold (also known as
HCE) |
The letter
H
around the rim separated by double lines. |
|
Recommended for 7/8" inlays. |
|
Hourglass |
A series
of hourglass images
around the rim. |
|
Recommended for 7/8", 1" & 1-16" inlays. |
|
Horsehead (also known as Horsehead
Right or HHR) |
A series
of horseheads
around the rim. |
|
Recommended for 7/8" inlays and
hot-stamping. |
|
Jockey |
A series
of 9 jockey's
around the rim. |
|
Recommended for 7/8" inlays and
hot-stamping. |
|
Large Crown |
A series
of 4 large crowns
around the rim. |
|
Suitable for 7/8" inlays only. |
|
Plain - Smooth (also known as No Mold,
No Design Mold or Crest & Seal) |
This mold
has a smooth finish but no rim design. |
|
Recommended for 7/8", 1" & 1-1/16" inlays.
RETIRED (worn out) |
|
Plain - Textured (also known as No Mold,
No Design Mold or Crest & Seal) |
This mold
has a textured finish but no rim design. |
|
Recommended for 7/8", 1" & 1-1/16" inlays. |
|
Roman (also known as Roman Border or
WEAVE) |
This mold
has a roman weave pattern around the
rim. |
|
Recommended for 7/8" inlays.
RETIRED (worn out) |
|
Roulette |
The word
ROULETTE repeated twice around the rim. |
|
Recommended for 7/8", 1" &
1-16" inlays.
AVAILABLE TO CASINOS ONLY |
|
Scroll |
A series
of scrolls
around the rim. |
|
Recommended for 7/8" inlays and
hot-stamping. |
|
Small Crown |
A series
of 12 small crowns
around the rim. |
|
Suitable for 7/8" & 1" inlays only. |
Inlays
come in three sizes - 7/8, 1 & 1-1/16
inch diameter. The inlay sizes
listed are those we recommend for each
mold. You may request sizes not
recommended but we cannot guarantee they
will look as nice. |
Sample
sets of the molds we have so far
produced from (12) are available.
See the price list or
samples page. |
|
|
|
|
|
REAL CLAY POKER
CHIP 44mm MOLD DESIGNS |
|
A-Crest (also known
as A-Mold or American Mold) |
The letter
A in four places separated by dashes
around the rim. |
|
Only available with 7/8" inlays. |
|
Scroll |
A series
of scrolls
around the rim. |
|
Only
available with 7/8" inlays. |
Inlays for
44mm chips are available in 7/8" size
only. |